332 AST & 6221AST DIRECT-FILL SPILL CONTAINERS
OP.AST.6221.AST
› Available in 2”, 4” and 6”
› 13.2 or 26.4 liter capacity options
› Integral Pull-to-Open Drain Valve allows high-speed
drainage of excess product into the tank
› Special cover design to keep rain and snow water out
of the unit
6211 SERIES REMOTE-FILL SPILL CONTAINERS
OP.AST.6211R
› Available in 56.7, 75.7 and 113.5 liter container
capacity
› Special cover design to keep rain and snow water out
of the unit
› Lockable ball valve drain provides for quick and easy
product removal
› Adjustable legs enable the unit to be set at a variety of
heights, from 41.9cm to 76.2 cm.
› Also offers extra connection point for vapor recovery
connection
61FSTOP OVERFILL PREVENTION VALVE
OP.AST.061.FSTOP
› Availabe in 2” and 3” full flow models. 2” version
requires a 4” opening on the storage tank whereas 3”
version requires 6” opening.
› Completely automatic operation. It does not require any
pre-checks, resets or overrides.
› Suitable to use with direct and remote fill applications
where pressurized fill is being applied.
› 10 bar pressure rated and requires a minimum flow
rate of 95liters/minute
› Additional longer-lenght drop tubes options are also
available. Please contact us for further details.
633B KAMLOK COUPLER
OP.AST.633B
› One end with kamlok and the other is with male thread.
› Available in 2”x1.5” and 2”x2” sizes
› Threads into an OPW 190 nozzle and then coupled to
61Fstop.
633AST SPOUT ADAPTOR
OP.AST.633AST
› Composed of 297 spout and adaptor unit.
› Available in 1.5”x1.5”, 2”x2”, 2.5”x2.5”, 3”x3” and
4”x4” sizes
› Attached to OPW 190 nozzles equipped with a 633BD
Kamlok coupler for open filling of ASTS when a 61fstop
is not installed.
DUST CAPS
OP.AST.634BK.0090
› Installed on 633AST adaptors and prenevents dust,
debris and water from entering the tank
› Available in 1.5”, 2”, 2.5”, 3” and 4” sizes
1611AN SERIES KAMVALOK ADAPTORS
OP.AST.1611AN
› Installed at the fill pipe and replaces the 633AST.
› Available in 1.5”, 2” and 3” sizes
› An internal spring-loaded valve assembly automatically
closes to help prevent fuel spillage.
› Mates with 1711D Coupler
1711D SERIES KAMVALOK ADAPTORS
OP.AST.1711D
› Installes on the fuel delivery transport truck hose.
› Available in 1.5”, 2” and 3” sizes
› When used with 1611AN, a seal-tight connection is
established and safe filling is assured.
› Mates with 1611AN adaptor
634A DUST PLUGS
OP.AST.634A-0180
› Installed in the end of the 1711D, preventing dust, dirt
and debris from damaging the internal components of
the coupler.
› Available in 2.5” and 4” sizes
200TG AST MECHANICAL TANK GAUGE
OP.AST.200.TG
› Designed for reading liquid levels in horizontal or
vertical above ground storage tanks
› Vapor tight feature allows for standard tank pressure
testing and sealing up to 1.72 bar
› Angled face may be read easily up to 9.14 meter away
› Swivel adaptor base allows for 360 degree of rotation
of gauge face for easy viewing.
› Optional drop tube gives the gauge a more accurate
reading when turbalance is present
› Designed for use on any horizontal or vertical above
ground tank up to 5.5 meter in depth.
› Black numbers on white background provide better
visibility
› Can be purchased in metric units to read in meters or
in English units to read in feet and inches
› +/-5.08cm. Accuracy, 2” Connection
› Temprature rating of -40 +40 degree celcius
