FILOSEAL

Connect. Seal. Protect.

Specialist in sealing technology

İnterpet Filoseal Ürünleri

Over 50 years experience and expertise as developer and producer

As energy, communications and continuous innovation are all inextricably linked with our lives today, modern communication and utility networks will play a vital role in the creation of our future society.
Filoform’s mission is to assist you in planning for this opportunity now and to provide you with the best solutions, applications and products to protect your investment in the future.
For over 55 years, we have developed expertise in manufacturing and supplying quality products and solutions to connect, seal and protect the underground cable networks of our international and domestic customers.
Filoform supplies a comprehensive range of quality solutions, applications and products to meet the general, specialist and bespoke requirements of cable, fibre optic and utility networks. Our sealing solutions are characterized by their simplicity, universal application and reliability.
We are at the forefront of R & D in our industry. This ensures that we meet our customers’ evolving demands with effective, bespoke and smart solutions. And if it does not exist, we create it.

MDI - Duct sealing system
for sealing ducts containing pliable cables available for duct openings Ø 16-60 mm

İnterpet Filoseal Ürünleri

Duct sealing system type MDI has been developed to provide an effective and simple solution for situations where a cable is formed around a small radius.
The MDI seals internally & externally around the outside edge of the duct and can be positioned in any orientation.
The kit contains a plastic mould together with the right volume of resin that is needed.

The sealing cap can be applied to the wall by using the special fixing anchor. This way it is not necessary to drill additional holes and to secure the cap with screws.
Filoform duct seals type MD are based on a specially formulated two-component expanding polyurethane resin. When installing our duct sealing system MDI, you will protect valuables from damage which is caused by gas and water leaks.

Product Name Duct diameter min.-max. (mm) Maximum cable diameter in the duct (mm) Order unit
MDI-1 Ø25 mm duct sealing kit Ø 16-32 Ø 12,5 max. per piece
MDI-2 Ø50 mm duct sealing kit Ø 32-60 Ø 25 max. per piece

FEATURES

Gas and watertight up to 1,0 bar
• One complete kit for sealing one duct
• Two fill openings
• Special fixing anchor
• High mechanical strength, resists ground movement, shocks and vibrations
• Easy and quick installation
• 2-component resin bag
• Short curing time


MDII - Duct sealing system
for sealing standard duct openings available for duct openings up to Ø 250 mm

İnterpet Filoseal Ürünleri

Duct sealing system type MDII has been developed to provide an effective and simple solution for all your Gas and Watertight duct sealing requirements.
The MDII seals internally & externally around the outside edge of the duct and even closes a possible gap between a PVC duct that has been casted directly into the concrete wall.
The kit contains a conical shaped mould together with the right volume of resin that is needed.
Filoform duct seals type MD are based on a specially formulated two-component expanding polyurethane resin. After pouring the resin in the duct, the resin starts expanding by forming CO2. During the expansion the polyurethane filling material penetrates all areas inside the duct, thus sealing all openings regardless of the shape of the duct or drilled hole.
The MDII system is suitable in situations where more than one cable or pipe is in the duct.

Product Name Duct diameter min.-max. (mm) Maximum cable diameter in the duct (mm) Order Unit
MDII-50 duct sealing kit Ø 50 max. Ø 40 max. per piece
MDII-110 duct sealing kit Ø 110 max. Ø 70 max. per piece
MDII-125 duct sealing kit Ø 125 max. Ø 90 max. per piece
MDII-160 duct sealing kit Ø 160 max. Ø 130 max. per piece
MDII-200 duct sealing kit Ø 200 max. Ø 160 max. per piece
MDII-250 duct sealing kit Ø 250 max. Ø 200 max. per piece

FEATURES

• Gas and watertight up to 1,0 bar
• Divisible conical shaped mould
• Special elastic cord to secure the cone
• Also suitable for renovation works
• Closed watertight cell structure
• Over 35 years of operational experience
• High mechanical strength
• Can be used in any shaped or sized duct up to 200mm


MDIV - Duct sealing system
for sealing of empty ducts available for duct opening Ø 75-160 mm

İnterpet Filoseal Ürünleri

Duct sealing system type MDIV is suitable for quick and easy sealing of empty ducts / drilled holes where cables or pipes are to be installed at a later date. The system provides an effective Gas and Watertight seal.
The product contains a special designed insert for applying into a duct opening. Before inserting it in to the duct opening the product is filled with the specially formulated two-component expanding polyurethane resin.
After applying the filled product in the duct, the resin starts expanding by forming CO2. During the expansion the polyurethane filling material penetrates all areas inside the duct, thus sealing all openings regardless of the shape of the duct or drilled hole.
This duct sealing system is extremely flexible and can be installed in ducts vertically and horizontaly.

Product Name Duct diameter min.-max. (mm) Maximum cable diameter in the duct (mm) Order unit
MDIV-1 Ø 75- 95 Ø 75-95 d.n.a. per piece
MDIV-3 Ø 95- 125 Ø 95-125 d.n.a. per piece
MDIV-4 Ø 125- 160 Ø 125-160 d.n.a. per piece

FEATURES

• Gas and watertight up to 1,0 bar
• Can be used in any shaped or sized duct
• One complete kit for sealing of one duct
• Re-enterable
• Visual check trough transparent plastic
• No architectural measures necessary
• Quick & easy installation


Filoseal+

FEATURES
• Gas & Water Tight - Up to 1 Bar
• Resistant to: Hydroarbons (Petrol, Diesel, Ethenol, LPG, Adblue)
• Resistant to: Methane, H2S, Chlorine, andmany other gases (Nedlab)
• Resistant to Rats & Termites (Mastotermes Darwiniensis) Northern Australian termites.
• Excellent Adhesion
• Flexible one component adhesive & sealing compound (MD+)
• Non-Corrosive
• Non Hazardous
• Complies with ATEX regulations
• Seals all common materials
• Suitable for retrofit
• Re-enterable
• WIMES Compliant, 3.02 (April 2013) Section 6.4.3.2-d.

İnterpet Filoseal Ürünleri

Filoseal+ HD

All the benefits of the FILOseal+ with the addition of the following features:

• Gas & Water Tight - Up to 2 Bar
• Seals Large LV, MV, & HV cables
• 100kg Pulling force on the cables
• 10xd at 45°, with 1 bar pressure

İnterpet Filoseal Ürünleri

Filoseal+ HD FIRE

All the benefits of the FILOseal+HD with the addition of the following features:

• Fire Resistant up to 4 hours BS EN1366-3 2009 & AS1530.4-2014 • Tested to London Underground - LUL S1085
• Tested to European rail applications - BS EN 45545-2:2013
• Tested to French rail standard CIt NF F16-10
• Tested to Smoke index - ISO 5659-2:2012
• Tested to Oxygen index - BS EN ISO 4589-2:1999
• WIMES Compliant, 3.02 (April 2013) Section 6.4.3.2-b

İnterpet Filoseal Ürünleri
İnterpet Filoseal Ürünleri

Filoseal+

universal re-enterable duct sealing system duct opening up to Ø 200 mm

**Larger sizes available upon request**

Duct sealing system FiloSeal+ is a universal solution for sealing cables and pipes in ducts, drilled holes or transit frames.
The tri-flexible foam makes positioning and separation of the cables very simple while also providing a backing for the MD+ to be applied on to. FiloSeal+ is suitable for sealing any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required. The Filoform duct sealing system FiloSeal+ uses our MD+ sealant which is easily applied from a skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicone compound that cures with air (Humidity).
After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

FEATURES

• Flexible, one component, adhesive and sealing compound in a cartridge (310ml)
• High levels of Gas and Water tightness
• Excellent adhesion
• Resistant against Water, Alkaline, Chemical agents
• Resistant to Hydrocarbons
• Suitable for sealing underground cable ducts set out within the APEA ‘Blue Book’
• Resistant to Hydrogen Sulphide/Methaneand many other Gases (NedLab)
• Resistant to rats
• Resistant to termites(Mastotermes Darwiniensis) Northern Australian termites
• Non corrosive
• Solvent free
• Shock absorbing
• Nontoxic, neutral and almost odourless
• Complies with ATEX regulations
• WIMES Compliant, 3.02 (April2013) Section 6.4.3.2-d.
• Suitable for any shapedduct/borehole/ opening
• Seals all known materials, PVC & PEsheathed cables, PILC, (HD) PE pipes
• Suitable for renovations, can be installed retrospectively
• Up to 1 bar pressure resistance
• Quick & easy to install, especially in vertical ducts • Non Hazardous
• Over 25 years of operational experience

Product Name Duct diameter min.-max. (mm) Maximum cable diameter in the duct (mm) Order unit
FiloSeal+125 mm Ø 125 max. Ø 95 max. per piece
FiloSeal+ 200 mm Ø 200 max. Ø 160 max. per piece
İnterpet Filoseal Ürünleri

Filoseal+ HD

universal re-enterable duct sealing system duct opening up to Ø 250 mm

**Larger sizes available upon request**

• Up to 2 bar Pressure Resistance
• 100Kg pulling Force on the cables when sealed
• 10xd at 45o, with 1 bar pressure bending test

FiloSeal+HD provides a strong support system using the hexagonal tubes which builds up like a honeycomb structure. FiloSeal+HD is suitable for sealing any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required. The Filoform duct sealing system FiloSeal+HD uses our MD+ sealant which is easily applied from a skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity). The unique design of the hexagonal tubes makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.

FEATURES

• High levels of Gas and Water tightness
• Excellent adhesion, applicable to all common building materials • Shows Fire resistance properties
• Resistant against Water, Alkaline, Chemical agents
• Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
• Non corrosive
• Solvent free
• Shock absorbing
• Non toxic, neutral and almost odourless
• Complies with ATEX regulations
• Suitable for any shaped duct / borehole / opening
• Quick and easy installation
• Seals all known materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
• Suitable for renovations, can be installed retrospectively
• Resistant to Rats
• Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
• Resistant to hydrocarbons

Product Name Duct diameter min.-max. (mm) Order unit
FiloSeal+HD - 75 mm > 110 mm Ø 110 max. per piece
FiloSeal+HD - 125 mm > 160 mm Ø 160 max. per piece
FiloSeal+HD - 180 mm Ø 180 max. per piece
FiloSeal+HD - 200 mm Ø 200 max. per piece
FiloSeal+HD - 225 mm Ø 225 max. per piece
İnterpet Filoseal Ürünleri

Filoseal+ HD FIRE

FiloSeal+HD FIRE provides a strong support system using our specially formulated material called Formite which builds up like a honeycomb structure.
FiloSeal+HD FIRE is suitable for sealing any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required.
The Filoform duct sealing system FiloSeal+HD FIRE uses our MD+ sealant which is easily applied from a skeleton gun. The high quality, one component,
flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).
The unique design of the hexagonal tubes makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.

• Up to 4 hours fire resistance in ducts
• Tested to BS EN1366-3 2009 & AS1530.4-2014
• Tested to London Underground - LUL S1085
• Tested to European rail - BS EN 45545-2:2013
• Tested to French rail standard CIt NF F16-101
• Tested to Smoke index - ISO 5659-2:2012
• Tested to Oxygen index - BS EN ISO 4589-2:1999 • Up to 2 bar Pressure Resistance
• 100Kg pulling Force on the cables when sealed
• 10xd at 45o, with 1 bar pressure bending test

FEATURES

• Gas & Water tight up to 2 bar
• Excellent adhesion, applicable to all common building materials
• Fire resistant to BS EN1366-3:2009 & AS1530.4-2014
• High Oxygen index
• Resistant against Water, Alkaline, Chemical agents
• Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
• Non corrosive
• Solvent free
• Shock absorbing
• Non toxic, neutral and almost odourless
• Complies with ATEX regulations
• Suitable for any shaped duct / bore hole / opening
• Quick and easy installation
• A complete kit
• Seals all known materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
• Suitable for renovations, can be installed retrospectively
• Resistant to Rats
• Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
• WIMES Compliant, 3.02 (April 2013) Section 6.4.3.2-b

Product Name Duct diameter min.-max. (mm) Order unit
FiloSeal+HD FIRE - 75 mm > 110 mm Ø 110 max. per piece
FiloSeal+HD FIRE - 125 mm > 160 mm Ø 160 max. per piece
FiloSeal+HD FIRE - 180 mm Ø 180 max. per piece
FiloSeal+HD FIRE - 200 mm Ø 200 max. per piece
FiloSeal+HD FIRE - 225 mm Ø 225 max. per piece
FiloSeal+HD FIRE - 250 mm Ø 250 max. per piece