Pump Motor Assemblies For Def/Adblue
FE PETRO® brand diesel exhaust fluid pump motor assemblies (PMAs) feature a stainless steel close-coupled design powered by a field-proven Franklin Electric motor.
HIGHLIGHTS
• Stainless steel, encapsulated motor ensures longevity and impermeability to DEF seepage.
• Heavy-duty shaft provides superior alignment and resistance to stress.
• Double mechanical shaft seals protect the oil-filled bearing chamber from DEF seepage, assuring minimal wear and proper bearing lubrication.
• Stainless steel hydraulics provide superior performance and efficiency.
• Multiple models available to meet global requirements of voltage and frequency.
• All models are suitable for vertical installation where the pump motor is suspended off the bottom of the tank by the discharge piping.
ORDER INFORMATION
DEF - PMA YYY Z
• DEF = Pump Compatible with DEF
• PMA = Pump Motor Assembly
• YYY = Pump Motor Hp Rating
• 150 = 11⁄2 Hp fixed speed (1.1 kW)
• Z = Motor Electrical Rating
• B = Single phase, 50 Hz, 210-250 VAC (rated 6.9 Amps, requires 30 microfarad run/start capacitor rated 440 VAC)
• C = Three phase, 50 Hz, 380-415 VAC (rated 2.6 Amps)
Note: Three phase models require overload protection in motor starter. Single phase models have thermal overload protection built into the motor.
SPECIFICATIONS
• Materials: Stainless steel construction including impellers/ diffusers, inlet/outlet, and outer shell
• Pump type: All models are 5.1" (130 mm) outside diameter centrifugal type pump
• Power cable: 23' (7 m) black polyethylene jacketed plug-in power cable
• 50 Hz pump motor: Three-stage pump with 2" BSPT female outlet.
• Motor rating: Continuous operation with motor cooling provided by product flow and protected from dry running
•
Bypass relief valve with cracking pressure of 30-40 psi (2.1-2.8 bar) and 4 gpm (15 lpm) minimum flow required at the discharge of all models.
• Non-return check valve with maximum cracking pressure of 3 psi (0.2 bar) required between product piping and bypass relief valve of all models.
• Liquid compatibility: All models are intended for use with Diesel Exhaust Fluid (DEF). DEF is a non-flammable, non-combustible liquid that has a specific gravity of 1.09 at 68°F, and is made per ISO 22241-1 specifications with 32.5% urea and distilled or deionized water. As defined by ISO 22241-1, DEF is the same as AUS 32 (aqueous urea solution).
50Hz DEF PMA
Model | Description |
---|---|
403383953 | DEF- PMA ISOC: single phase, 50hz, 200-250 VAC, I.5 Hp |
403383963 | DEF- PMA ISOC: three phase, 50hz, 380-415 VAC, I.5 Hp |
SUBMERSIBLE TURBINE PUMP KITS FOR DEF/ADBLUE®
Our FE PETRO® brand diesel exhaust fluid submersible turbine pump (STP) kits come with everything you need for pumping DEF/AdBlue®. DEF STPs are offered in easy- to-order variable length complete packages or as individual kits for fixed length applications. Powered by the legendary Franklin Electric motor, our DEF STPs are built specifically for DEF applications with a host of application-specific features you won't find on anything else out there.
Designed Just for DEF
Building on the field-proven DEF PMA, our DEF STPs are designed with innovative technology to suit the specific needs of DEF/AdBlue® applications. Unlike others, our entire offering is designed specifically for use in DEF.
• The PMA offers a stainless steel encapsulated motor with mechanical shaft seals to protect the motor bearings, isolating the motor from product and preventing any contamination of DEF wetstock.
• DEF STP kits feature stainless steel hardware and Viton® or EPDM elastomers for compatibility and longevity.
Performance is Everything
With demand for DEF varying from site to site, we've made it easy for you to select a single STP that is designed to perform at maximum efficiency no matter the demand of your application.
• The DEF STP's output caters for both large and small applications without excessive nozzle pressure that can make the trigger hard to squeeze and cause them to shut off prematurely.
• Stainless steel hydraulic impeller provides superior performance and efficiency through the life of the STP.
We've Made it Simple
The complete variable length DEF STP includes everything you need in a pre-configured package for ease of ordering and ease of installation.
• The full variable length kits make it easy to install in most applications while the fixed length kits provide the flexibility to install or retrofit any application.
• Models for both 50 Hz and 60 Hz markets, as well as single phase and three phase applications.
Pump Motor Assembly
• Field-proven Franklin Electric encapsulated motor ensures longevity and impermeability to DEF seepage.
•
Heavy-duty shaft provides superior alignment and resistance to stress.
• Double mechanical shaft seals protect the oil-filled bearing chamber from DEF seepage, assuring minimal wear and proper bearing lubrication.
• Stainless steel hydraulics provide superior performance and efficiency.
• EPDM jacketed power cable provides DEF compatibility and longevity.
• All models are suitable for vertical installation where the pump motor is suspended off the bottom of the tank by the discharge piping.
Submersible Turbine Pump Kit
Submersible turbine pump kits come complete with variable length column pipe kit, check valve kit, bypass kit, EZ FIT pump motor assembly connection kit, and pump motor assembly.
• Submersible turbine pump kits also available for locally supplied fixed length column pipe applications.
•
Bypass relief valve creates a continues bypass of fluid to keep the motor cool.
• Check valve maintains line pressure while the pump is not in operation.
• EZ FIT PMA connection makes disconnection and reconnection of the PMA quick and easy.
• Each EZ FIT connection comes complete with coupler and gasket to ensure tight connection.
SPECIFICATIONS
Pump Motor Assembly
• Materials: Stainless steel construction including impellers/ diffusers, inlet/outlet, and outer shell
• Pump type: All models are 5.1" (130 mm) outside diameter centrifugal type pump
• Power cable: 23' (7 m) black polyethylene jacketed power cable
• 50 Hz pump motor: Three-stage pump with 2" BSPT female outlet
• Motor rating: Continuous operation with motor cooling provided by product flow and protected from dry running.
Submersible Turbine Pump Kit
• All stainless steel hardware and Viton® or EPDM seals
• Bypass relief valve cracking pressure of 30-40 psi (2.1-2.8
bar) and 4 gpm (15 Ipm) minimum flow at the discharge of all models
• Non-return check valve cracking pressure of 3 psi (0.2 bar) between product piping and bypass relief valve of all models
Liquid compatibility: All models are intended for use with Diesel Exhaust Fluid (DEF). DEF is a non-flammable, non-combustible liquid that has a specific gravity of 1.09 at 68°F (20°C), and is made per ISO 22241-1 specifications with 32.5% urea and distilled or deionized water. As defined by ISO 22241-1, DEF is the same as AUS 32 (aqueous urea solution) and also commonly known as AdBlue®
SPECIFICATIONS CONTINUED
Variable Length Components
Each variable length submersible turbine pump kit comes complete with variable length column pipe kit (VL1 or VL2), check valve kit, bypass kit, EZ FIT pump motor assembly connection kit, and pump motor assembly (single or three phase).
1 Variable length column pipe kit, 2" to 12" NPT
(not sold separately)
2 Check valve kit
3 Bypass kit
4 Pump motor assembly connection kit
5 6 Pump motor assembly (single or three phase)
ORDER INFORMATION
Variable Length Diesel Exhaust Fluid Submersible Turbine Pump Kits
Each variable length submersible turbine pump kit comes complete with variable length column pipe kit (VL1 or VL2), check valve kit, bypass kit, EZ FIT pump motor assembly connection kit, and pump motor assembly (single or three phase).
Model | Description |
---|---|
403472901 | 50 Hz, single phase, VL1 71" - 104" (1,800 mm - 2,640 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #5) |
403473901 | 50 Hz, single phase, VL2 104" - 168" (2,640 mm - 4,265 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #5) |
403475901 | 50 Hz, three phase, VL1 71" - 104" (1,800 mm - 2,640 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #4 and #6) |
403476901 | 50 Hz, three phase, VL2 104" - 168" (2,640 mm - 4,265 mm) variable length diesel exhaust fluid submersible turbine pump kits (includes components #1 - #4 and #6) |
Variable Length Diesel Exhaust Fluid Submersible Turbine Pump Replacement Kits
Item | Model | Description |
---|---|---|
2 | 403463901 | Check valve kit (includes 1/2" NPT non-return check valve, 12" NPT x 4" long nipple on inlet, and 2" NPT female x 2" BSP male adapter on outlet) |
3 | 403461901 | Bypass kit (includes 1/2" NPT bypass relief valve, 1/2" NPT x 12" NPT bushing in 1/2" NPT tee) |
4 | 403455901 | Pump motor assembly connection kit (includes 2" BSP male inlet x 12" NPT male outlet EZ FIT connection |
5 | 403383953 | 50 Hz, single phase pump motor assembly (DEF-PMA150B) |
6 | 403383963 | 50 Hz, three phase pump motor assembly (DEF-PMA150C) |
Variable Length Accessories & Repair Parts
Model | Description |
---|---|
403713922 | Single phase electrical kit, includes STP-CBBS (200-250 volt pump control with 240 volt coil, p/n 400818922) & 30uF/440V capacitor (p/n 400170937, for use with DEF-PMA150B) |
401220966 | Three phase 380-415 volt pump control box with over- load protection and 240 volt coil (STP-CBB3C) |
403459901 | 2" NPT female x 2" BSP male thread adapter (part of component #1, adapter only) |
403408931 | 1/2" NPT non-return check valve (part of component #2, valve only) |
403409931 | 1/2" NPT bypass relief valve (part of component #3, valve only) |
403468901 | DEF-PMA hardware pack (part of components #5 or #6, includes cable grip, cable ties, and documentation) |
400î70937 | Capacitor, 30 uF/440 V (for use with DEF-PMA150B) |